Coaxial Cable Network Unit wifi EOC

FLY-CNU240 coaxial cable network unit is an EOC (Ethernet over Coax) Slave which can be networking with FLY-101CLT coaxial cable terminal (Master). They can build Layer-2 Ethernet transmit network through cable television coaxial cable and meanwhile have no influence on the pre-existing CATV signal transmit.

alisa(at)opticres.com skype ID:alice.yee2

FLY-CNU240 provides four 100M full-duplex Ethernet interfaces that can be simultaneously connected to terminals such as computer, set-top box of digital television, IP phone, etc. It supports QoS set up and can provide corresponding transmit guarantee of priority level for data stream of different service types. It supports bandwidth control. Maximum Uplink bandwidth of every FLY-CNU240 can be set up in order to prevent the attack to the whole coaxial transmit network when devices of other customer premises network go wrong or artificial attack happens. Encrypted transmit is also available to satisfy the service need of high reliability.

alisa(at)opticres.com skype ID:alice.yee2

FLY-CNU240 and FLY-101CLT networking completely meets the requirement of Triple-play (integrating three networks into one) of broadcasting and television system. In actual networking, one single FLY-101CLT can under-connects 253 FLY-CNU240 to realize relatively high convergence ratio. FLY-CNU240 occupies Low Frequency Band under 30MHz and has no collision with the current CATV system frequency which can decrease mutual interference.

FLY-CNU220 only provides single Ethernet interface. Other specifications are the same as FLY-CNU240.

EOC terminal alisa(at)opticres.com skype ID:alice.yee2

FLY-CLT102 Single module common type indoor EOC ,

FLY-CLT102 single module management type indoor EOC

FLY-CLT102 Single module common type outdoor EOC ,

FLY-CLT102 single module management type outdoor EOC

1/2/4port EOC terminal

ONU+EOC management type EOC

Double-module management type EOC

EOC data transmission connector

EOC extender