1200mm 18w 1950lm with CE/PSE/TUV dimmable led t8 tube fluorescent

1200mm 18w 1950lm with CE/PSE/TUV 4 feet dimmable led t8 tube fluorescent light  

------------------------------------------------------------------------------------------------------------------

Product name :LED tube Light,LED T8 tube light,LED fluorescent tube

------------------------------------------------------------------------------------------------------------------

Specification of LED tube light:

Packing information of LED tube light:

led Tube light Advantages

1)  Direct replacement ------ you don\'t remove the traditional ballast  and you also don\'t need change any circuit at all ,very save labor cost.

2)  Advanced modes of connection ------  connect any 2 pins can light up,when you touch the other 2 pins at that time  ,it is very safe,because the other 2 pins are nonconductive ,you don\'t worry you shall electronic shock at all.

3)  Nice heatsink ------ we use aluminum housing,aluminum PCB and aluminum base materials,highly improve the heatsink of the tube.

4)  Low light degradation ------ we produce led tube many years and have much experience in ,we has found the best connection point of led tube ,so the degradation of our led tube is very slow.

5)  High Quality ------ the drive power is a independent part of the tube ,it is specially designed by ourselves,we are full confidece of the led tube\'s quality,we are also confident of 3 years warranty of our led tubes.

led Tube light  Application

1)  factory,school,hospital,goverment,etc

2)  engineering works,advertising box,etc

3)  bus,train,subway,underpass,passageway,etc

4)  living room,office,warehouse,etc

5)  conference room,office,warehouse,etc

6)  showcase,exhibition mall,supermarket,shooping mall,etc

Installation Method of LED tube light:

Attention: Turn off power supply before installation.

Installation step:

1.If lighting fixture is magnetic ballast,installation as below:

    a):Take away the traditional fluorescent tube or old led tube from the bracket

    b):Install the New led tube,do not need to change any electronic circuit,directly replacement.

2.If lighting fixture is electronic ballast,installation as below:

    a:)Take away the traditional fluorescent tube or old led tube

    b:)Remove the electronic ballast

    c:)Install the New led tube

3.AC connection

    a:)Connect any two pins of the led tube with AC power.

    b:)the led tube works normally and safely,even you touch any of the rest pins without switching off  the power.also,you are absolutely safe

View of LED tube light factory: