Double Lines warm white 3014 led strip lights canada DC12/24V outdoor

Double Lines warm white 3014 led strip lights canada DC12/24V outdoor

1, Advantages:

220V high voltage led strip is an \"updated version\" of the low voltage strip.The use of DC 12V led strip has to be with a miniwatt adapter,and its best length is 5 meters.For the projects,this is very inconvenient. Now,our high voltage strip could solve all the problems.100 meters in one line without connection,and no signal amplifier needed. Cost-saving on power supply and installation,easy to transport and install. 

2, Features:

1.Energy saving,environment protection,longl life,low light decay,Flexible IP65 Light Body.

2.High quality and bright SMD LEDs as lighting source, can be bent as you need,easy to install.

3.The price is competitive,no extra power supply or transformer necessary

4.Less 1% attenuation after 3,000 hours

5.Long lifespan: 50,000 to 80,000 hours

6. High quality: The PU glue products can not be rework, required the materials and the production process must be in high quality;

7.360 degree waterproof

 3, Applications: 

1) Architectural/Holiday decorative lighting

2) Archway, canopy & bridge edge lighting

3) Amusement part, theater & aircraft cabin mood lighting

4) Emergency hallway lighting

5) Auditorium walkway lighting

6) Stairway accent lighting

7) Concealed/Window display lighting

8) Backlighting for signage letters/Ad signs, light boxes

9) Channel letter lighting

10) Cove lighting

11) Swimming pools and fountains

12) Car decorative lighting

4. SIZE:

5, Installation Diagram


1.Cut the led strip at the mark” sicciors”(DC12v every 3leds or DC24v every 6leds)

2.Open the silicon glue cap and inject the silicon glue into the end cap without holes

3.Push the strips into the end cap and let the silicon glue dry for 1 hours

4.Put the connector wires through the end cap holes

5.Solder the wire on PCB

6.After solder the two wires correctly,push the strips into the end cap with wires carefully 

7.Inject the silicon glue into the end cap

8.Make sure the end cap and strip connect well and let the silicon glue dry for 1 hours

Welcome to our store, wish you find your special items