Addition cure silicone rubber for poly resin crafts mold making

Applications 

Addition cure silicone rubber for poly resin crafts mold making is a kind of food grade slicone rubber.It is primarily intended for cake mold,candy mold,chocolate mold and other food grade silicone,
also intended for poly resin crafts, PU crafts, PU resin crafts, gypsum crafts, unsaturated resin crafts, lighting and candles crafts, plastic toy, stationery gifts crafts industry, a large statue Buddha, furniture, furniture decorative materials, statues Buddha, artifacts copied, 

building decoration materials, largescale cement mold, artificial fossils Factory, Europe component factory, simulation landscapes, animals and plants sculpture, sandstone crafts and so on.

Brief introduction 

Addition cure silicone rubber for poly resin crafts mold making is mainly used for metallic art andcrafts,babynipple,cake, candy food grade products mold making and so on. It is nontoxic and with very low shrinkage.

Feature

(1) with SGS and RoHS approval 
(2)Normally Curing agent arrange together as free charged 
(3) In liquid form and in various colors 
(4) with an exceptional fluidity and good operability. 
(5)Temperature and deformation resistance as well as low shrinkage. 
(6) High duplication times. 
(7) Sample are available 

Picture show 

Datasheet

FAQ

Why is the appearance of the finished mold striate and unsmooth?

It is because the appearance of the product or the model itself is not perfect, and it has not been polished before the further operation. So when you make silicon molds, firstly you should polish the product, spray the mold spray evenly on the product. In this case, the problem can be avoided.

Operation way 

1.Stir part A and part B with right mixing ratio evenly. And get the mixture for vacuum-pumping.

(If there is no vacuumizer,you can just pour the mixture slowly from the corner so that less bubbles caused).

2. Enclose the product (the original model) with four plastic plates or wooden plates.

3. Clean your products and brush a layer of release agent(detergent or soap water) on your product.

4. Pour the mixture with correct mixing ratio into the model frame.

After about 2-4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone mold.

Storage 

Addition cure silicone rubber for poly resin crafts mold making is an environment friendly liquid silicone products, is not easy to burn and can be stored and transported as nonhazardous goods. 

The shelf life of the product is about 9 months from the date of production. 

Inspection is required when exceeding the time limited. It can continue to be used in case of neither thickening nor deterioration.  

Package

5kg/drum, 20kg/drum and 200kg/drum

Shelf-life 

Twelve (12) months under room temperature 25 Celsius.

Certification 

ISO9001: HK05/01358 

SGS:GZ0606100461/CHEM

RoHS:BTRS091718751

Patent:ZL200520001597.8

Need any help on silicone rubber, please feel free to contact Ms Kitty:

Tel:86-755-89212369

Mob:86-18938867593

E-mail: hyjz(at)szrl(dot)net   

Skype:kity-467707861

You can also sned me E-mail by scanning QR code below:  

About us: