rtv2 platinum silicone for grc, gfrc moulding,silicone manufacturer

rtv2 platinum silicone for grc, gfrc moulding 
 

APPLICATIONS of rtv2 platinum silicone for grc, gfrc moulding:

rtv2 platinum silicone for grc, gfrc moulding could be mainly used for making concrete stones, precision molds, PU molds, resin molds, gypsum casting, candle molding, for life casting, fabric finishing, seal for electronic components and solar circuit board, trademark decoration. etc.

FEATURES of rtv2 platinum silicone for grc, gfrc moulding

Two-parts, flowable liquid silicon & curing agent.

Can solve the problem of not lighting of the candles and the problem of sticky and white stains on the surface of cement & stone products.

Good tensile strength and tear strength,low shrinkage.

It gets cured at room temperature 25 0C within 5-7 hours.

An exceptional fluidity and good operability, easy to be demolded.

Suitable for pouring methods of operation for small sized molds making.

Datasheets of rtv2 platinum silicone for grc, gfrc moulding

DESCRIPTION of rtv2 platinum silicone for grc, gfrc moulding

rtv2 platinum silicone for grc, gfrc moulding is generally named two-components silicone rubber, Part A and part B. It features an exceptional fluidity and good operability. The mixing ratio is 1:1,mainly be suitable for making molds application.

rtv2 platinum silicone for grc, gfrc moulding is mainly used for molds making for food grade products. And it is also develop to solve the problem of not lighting of the candles and the problem of sticky and white stains on the surface of cement & stone products.

OPERRATING INSTRUCTION of rtv2 platinum silicone for grc, gfrc moulding

1.Stir part A and part B with right mixing ratio

evenly. And get the mixture for vacuum-

pumping. (If there is no vacuumizer,you can just pour the mixture slowly from the corner so that less bubbles caused).

2. Enclose the product (the original model) with four plastic plates or wooden plates.

3. Clean your products and brush a layer of release agent(detergent or soap water) on your product.

4. Pour the mixture with correct mixing ratio into the model frame.

After about 2-4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone mold

SHELF LIFE of rtv2 platinum silicone for grc, gfrc moulding:

Twelve (12) months from date of shipment when stored at 24°C in original unopened packages.

PACKAGE of rtv2 platinum silicone for grc, gfrc moulding

Packed in clean 5kg/pail, 25kg/pail, 200kg/pail.

Need any help on silicone rubber, please feel free to contact Ms Maggie
 
Tel:86-755-89212369
Mob:86-13828847574
E-mail: hyju(at)szrl(dot)net   
Skype:maggie.cao82