Shenzhen Ogemray Technology Co., Ltd.
Shenzhen Ogemray Technology Co., Ltd.
3G 150Mbps Mifi Wireless Router with 2000mAh Power Bank
  • 3G 150Mbps Mifi Wireless Router with 2000mAh Power Bank
3G 150Mbps Mifi Wireless Router with 2000mAh Power Bank

3G 150Mbps Mifi Wireless Router with 2000mAh Power Bank

Payment Type:
L/C, T/T, Western Union
Quantity:

Your message must be between 20 to 2000 characters

Contact Now
Basic Info
Basic Info
Place of Origin: China
Payment Type: L/C, T/T, Western Union
Product Description
Product Description
1.3G hotsport + mini WiFi AP + power bank

2.2000mAh USB power bank

3. Support WiFi Media Sharing function

4.150Mbps peak rate

Product features

WLAN performance:

Frequency range: 2.4GHz—2.4835GHz

Transmission distance: 100m indoors, 200m outdoors. (depend upon environment)

RF output power: 11g/n: 12~13/14~15dBm, 11b: 17~18dBm.

Antenna type: Built-in 1dBi ceramic antenna

Portable charger:

Battery: 2000mAh, duration 3.5—8 hours

Charging current capacity is 960mA, charging interval is 4.5 hours.

Network function:

Embedded NAT firewall with SPI, the device supports PING, MAC Address, IP address and content filtering toward URL and domain name, has general network function such as virtual server, VPN penetration, port trigger, DMZ, DDNS.

Software management

Embedded configuration guide elfin is easy for installation and operation. Upgrade the latest firmware easily through web configuration. Specific emergency

Software recovery can ultimately avoids collaps due to failture of software upgrading.

Physical characteristic

Size: 95.0mmX34.5mmX18.0mm

Weight: 65g

Battery indicator:

Show remaining charge: In whatever status it's, press charge indicating button (beside

Switcher) to view charge balance in terms of the

LEDs' status. (4 lights being all on means full charge. )

View charging status: Plugging an external adapter, blue LED being on shows it's charging now, and blue LED being off shows full charge.

Environmental conditions:

Operating temperature: 0°C--+40°C(32—104°F)

Humidity: 10%--90%(Non-condensing)

Configuration

Once devices with WiFi enabled or Ethernet connect with the router, type the default address(192.168.100.1) through browsers in them, a check dialog box pops up, and then input the account and password (both is "admin" by default), have access to the Webpage for configuration.

Default networking mode is 3G. If it needs to switch into WiFi mode or Ethernet mode, please access the configuration webpage.

Network access

The device supports 3 networking approaches: 3G/ADSL/wireless WISP.

3G: Push the swither to "R" position, default mode is wireless 3G. Insert wireless network card into USB port, and the device will be able to dial-up automatically without any settings.

Cable bandwidth internet access: It contains 3 modes: DHCP, PPPOE, STATIC. This is the same way as PC accesses Internet via Ethernet port.

WiFi networking: Like WiFi cards, in the WiFi mode setup window, click "start scanning", and it should display nearby APs, select preferred AP (by SSID), type its security mode and password if needed.

Charging operation instructions on digital devices

Shutdown charging: Push swither to "c", connect power lines of digital products to USB port on the router, at this time the device will charge iPhone /iPad/Android smartphone, etc.

Startup charging: Push swither to "R", connect power lines of digital products to USB port on the device, here the device will charge iPhone /iPad/Android/smartphone, etc.

Send your message to this supplier

  • Ms. Linda

  • Enter between 20 to 4,000 characters.

Related Keywords

Related Keywords