LED Aquarium Light for Reef Dimmable Four Control Channels (120W)

1)Sizing Tips:
For 24" and 36" aquariums 1 fixture. For 48" aquariums 2 fixtures. For 72" aquariums 3 fixtures.

2)Optics: The optics are 90 degree optics which focuses the light beam into a 90 degree angle
And thus directs all the light down instead of losing some light to outward projection.
3)Mounting: Optional wire hanging kit with convenient brass fittings, and slide-on legs, both included.

Both photo synthetic SPS and LPS corals flourish under its precision lighting environment. Exclusively developed for SPS reef aquariums and other high intensity applications.
Stylish contours make this light aesthetically pleasing.
Controlled by the LCD side mount and wireless remote control. Fully programmable, 4 channels for controlling four colors separately, allowing the ability to control, dim and time the LEDs for a full 12 & 24 hour dawn to dusk photo cycle.
LEDs: USA CREE™ XLamp® . There is 12 LEDs in each interchangeable pad. There is 3 pads.
USA CREE™ XLamp® LED Color: CREE XT-E Cool White, CREE XT-E Warm White, CREE XP-E Blue, and Super Actinic Blue.
Watts: Energy Efficient at 108 watts, but at the same time offers superior light output.
Dimensions: 23.75" x 10" x 2" (L x W x H)
Kelvin Rating's: 16K-18K
Specifications Continued...
1)400 PAR Value at 24 inches: Good penetration for aquariums up to 24 inches in depth.
Weight: 7 lbs.
2)Chassis & Frame Materials: Rust Proof Oxidized Aluminum & Rust Proof Oxidized Titanium.
3)Interchangeable LED Pads: These units are designed to be modular, so that you can change the color pad, if needed, to accomodate a particular aquarium set up, for example a freshwater planted aquarium may choose to run a LED pad with Green and/or Red LEDs. For a coral reef aquarium a 12 LED pad consists of (4) 470 Nanometer Blue, (2) 420 Nanometer Blue, (4) 6, 500 Kelvin White, and (2) 10, 000 Kelvin White.
4)Mounting: Optional wire hanging kit with convenient brass fittings, and slide-on legs, both included.
5)Shunt Protection: Includes shunt protection tubes (leap circuits). In the unlikely event should one CREE LED burn out, the rest of the CREE LEDs keep on running. One open circuit (blown LED) can cause an entire LED string to go dark leading to costly results. Because shunt protectors are added, this allows the healthy LEDs in the string to remain illuminated by shunting current around the inoperable LED. Since your expensive corals require an LED lighting application that is highly stable and has reliable functionality, you can now see the added benefit of shunt protection tubes. In conclusion it will keep the rest of your LEDs running until you are able to get that one burned out LED replaced.
6)Spectrograph USA CREE™ XLamp® :
White LED: 8, 000K - 16, 000K, ~100 lumen / watt
Royal Blue LED: 450nm - 465nm
Red LED: 640nm - 660nm
Blue LED: 465nm - 485nm
Green LED: 505nm - 520nm
Super Actinic 410nm - 420nm
Total Lumens: Over 9, 000 Lumens
Equal to MH / HPS light 250w - 400w