Dimmable LED Tube Light T8

T-Tube is compatible with triac dimmer, it is upgraded version CFL tube replacement with LED. It has
The best configuration of brightness and power efficiency.
T-tube is designed to replace medium bi-pin T8 and T12 fluorescent tubes. T-tube fits directly into most
Fluorescent fixtures providing a simple upgrade to high qual ity LED l ighting. T-tube is optimized to
Provide l ight outputs comparable to fluorescent and del ivers the immediate benefits of white-LED l ighting;
Long l ifetimes, no maintenance, high efficency, no mercury, no recycl ing, no fl ickering, no buzzing, instant
Start, cold temperature operation, and high qual ity l ight. It provides energy savings of up to 75% over
Fluorescent appl ications that require long hours with low occupancy rates such as stairwel ls, corridors,
Warehouses, and remote locations. The high qual ity T-tube replacement tube is constructed from
Extruded aluminum to provide a virtual ly unbreakable, vandal proof lighting solution.

Why our T-tube?
-Much longer l ife than CFL tube: Min. 10 years (suppose that light is on 8 hours per day)
-70%~80% Energy-saving over Fluorescent tubes
-Sol ID State, high shock/vibration resistant
-Work without bal last, Instant soft-start
-No RF interference, No fickering or buzzing
-Quick and easy instal lation to minimize retrofit costs
-Minimum maintenance costs, Produce l ittle Heat
-No Mercury and other hazardous materials, fully RoHS-compl iant
-Continuous operation for white LEDs (10 years for other colors)
-Rated to operate from -4° F to 104° F [-20° C to 40° C], perfect for
Environments with extreme cl imates
-Epistar+Intermatix LED packaging solution, no patent trouble
-The newest design
-The best cost-effective
-Complete electricity isolation design, safety prove
-ETL certification
Technical Parameters:
Standard length 60cm, 120cm and150cm.
Rated input voltage: AC200-240V 50-60Hz.
PF (power factor) >0.9.
Light efficiency > 95 lm/W (clear and wave cover)
PF (power factor) >0.9.
Installation information:
1. Please read the specification first, to make sure the service environment matches the condition in the specification before using.
2. Please confirm the applicable power supply before using.
3. Make sure the switch of product is off before connect to the power supply to prevent electric shock.
4. Operation against rules may damage your property even harm to your personal safety.
5. Preliminarily estimate required quantity of LED lights, then according to the power rating of single flood light to figure out
The total power and design power supply plan.
6. Dangerous high voltage, Non-professionals are not allowed to maintain the products.
If the exterior flexible cable or wire is damaged, it must exchange by the supplier, its agent or other similar qualified personnels to avoid dangers. Power must be cut off before installation, fix it on the position of installation holes, connection of the power supply must be sealed.