Variable Voltage Electronic Cigarette EGO Chromes Lava Tube V2 Eciga

Variable Voltage electronic Cigarette Chromes Lava Tube V2

Technical Specifications

1, output voltage 3.0-6.0V

2, output current 0-2.5A

4, short circuit protected current

5, quiescent current

Safety system

1, super low quiescent current protection

2, Reverse battery protection

3, Over-current protection

4, Short circuit/atomizer protection

5, Low Voltage Warning

6, Vented bottom

Operating Your Epic Storm/Wild Rider/Lava Tube Version 2.0 Variable Voltage E-Cigarette
The Epic Storm uses 18650 Batteries the same as the Wild Rider or Lava Tube mods.

1. The power button: Press it for 5 seconds to turn on the device and again to turn it off. 5 quick clicks the LCD will show you the battery's real voltage.

2. Decreasing the voltage("-"button): Press this button to decrease the voltage by 0.1V increments showed the LCD. Once below 3.0V it will cycle back to 6.0V.

3. Increasing the voltage("+"button): Press this button to increase the voltage by 0.1V increments in the LCD. Once over 6.0V it will cycle back to 3.0V.

4. Press "+" and "-" button at the same time for 5 seconds, you will get a locked voltage of your desire. Do it again to release it.

5. The vaping button(the biggest one): Once power button has been enabled, you can use this button to power the fitted atomizer.

6. The warning LCD: The device can only work when the battery power is 3.0V-4.2V. So when the battery's real power below 3.0V or above 6V. The LCD will flash 10 times to warn you. It can not work at this time and you'd better to charge or replace the battery.