2014 New Release Launch Creader V+ DIY Code Reader Update Via Network

LAUNCH Creader V+ is the next generation of vehicle fault diagnosis tool developed by Launch, especially for the DIY users and the servicemen of small service workshop. It supports read/clear DTCs and read datastream. With built-in help menus and code definitions, diagnosing and repairing that dreaded Check
Engine Light is now easier than ever!

Moreover, Creader V+ also feature the following bi-directional "special tests": EVAP, O2 Sensor, I/M Readiness, MIL Status, VIN Info, and On-board monitors testing.

Creader V + Highlights:
1. Support Color, the Multiple Graphics Streams
2. Multi-Language Supported: English, French, Spanish
3. Support Fault Code Query
4. Update: Software Upgrade via USB port network Quick upgrade via USB 2.0

Advantage of LAUNCH Creader V+:
Support Agreement: ISO9141-2, ISO14230-4, SAEJ1850, ISO15765-4
Support Mode $ 01 reading dynamic data flow, fault indicator light, ready state
Support Mode $ 02 freeze frame data query
Support Mode $ 03 reading current fault codes
Support Mode $ 04 clear fault codes
Support Mode $ 05 oxygen sensor detection test
Support Mode $ 06 monitor specific vehicle monitoring system
Support Mode $ 07 pending fault code reading
Support Mode $ 08 monitor vehicle systems or components
Support Mode $ 09 to read vehicle information
Support Mode $ 0A permanent fault code readingfeatures: Full support OBDII functions
Data Flow graphics capabilities, allowing more intuitive observation
Have trouble code, data stream and other information queries
Silicone keys, 6 key operation more comfortable and convenient

It can be connected to PC through the USB cable for upgrade to keep updated with the latest software version.
Notice: Creader V+ may automatically reset while being disturbed by strong static electricity. THIS IS A NORMAL REACTION.

Diagnostic Trouble Codes (DTCs)
OBD II Diagnostic Trouble Codes are codes that are stored by the on-board computer diagnostic system in response to a problem found in the vehicle.
These codes identify a particular problem area and are intended to provide you with a guide as to where a fault might be occurring within a vehicle.
OBD II Diagnostic Trouble Codes consist of a five-digit alphanumeric code.
The first character, a letter, identifies which control system sets the code.
The second character, a number, 0-3; Other three characters, a hex character, 0-9 or A-F provide additional information on where the DTC originated and the operating conditions that caused it to set.
Here below is an example to illustrate the structure of the digits

Specifications
Screen 2.4" TFT, 176*220 dots LCD display
Input voltage range 9 ~ 18V
Operating temperature 32° F~122° F / 0° C~50° C
Storage tempetature -4° F~158° F / -20° C ~70° C @ RH60%
Outline dimension 120*75*20 mm (L x W x H)
Weight <17.6 oz (500g)

Accessories
1) User's Manual -- Instructions on tool operations
2) USB cable -- Connect to a computer for upgrading online

Power supply
The power of the Creader V+ is provided via the vehicle Data Link Connector (DLC). Follow the steps below to power it up:
1) Find DLC on vehicle
A plastic DLC cover may be found for some vehicles and you need to remove it before plugging the OBDII cable.
2) Plug the connector at the end of OBD II cable to the vehicle's DLC.

Vehicle Coverage
The Creader V+ is specially designed to work with all OBD II compliant vehicles, including Control Area Network (CAN).

Package List:
1pc x LAUNCH Creader V+