Digital Signal to Digital Signal Relay Output Converter with RJ45 Port Support Modbus TCP

Digital Signal to Digital Relay Signal Output D-D Converter
Support Modbus TCP with RJ45 Interface
SYDD-RJ45 Series  D-D Converter

Digital Signal Relay Output D-D Converter Features:

>>Support 100/10Mbps Ethernet port & MODBUS TCP.
>>6-channel digital signal input and isolation, 6-channel relay and RJ45 signal output.
>>Wide range power supply: 8-36VDC
>>High reliability, easy to program and install.
>>User can set address, baud rate by programming.
>>Monitor and display data in industrial site.
>>Refined external shape, high reliability, easy to program, 35mm DIN Rail-mounted package. 

Digital Signal Relay Output D-D Converter Applications:

>>Monitoring, measuring and remotely controlling the industrial field through local area network.
>>Gathering 0-10V/4-20mA PLC/DCS/FCS signal and converting into Ethernet RJ45 output. 
>>Meters and instruments data acquisition and recording
>>Monitoring operating data from electric equipment, transportation and other equipment system.  
>>Realize network operation in Environment protection equipment, security, medical equipment, etc.

Digital Signal Relay Output D-D Converter Model Selection:

Digital Signal Relay Output D-D Converter General Parameters:

(typical @ +25ºC,Vs: 24VDC)
 Input type: 6-channel isolation digital signal.          
 Output type: 6-channel relay.

Digital signal input:
            Dry contact: GND or collector
            Wet contact: logic level 0: +1V (max.)
                       logic level1: +4V~+30V
            Isolation voltage: 3000V
            Input channel can be used as 500Hz counter.

Relay output: (A Type)
            Joint capacitor: 250VAC@1A
                         30VDC@2A
            Relay well connection time: 7mS
            Relay disconnection time: 3mS
            Break down voltage: 500VAC
            Insulation resistance:≥1000MΩ
            Relay can be used as pulse output.

Input terminal protection: over-voltage protection, over-current protection

Communication:  Ethernet, support standard Modbus TCP protocol, RJ45 net interface.
                Parameters configurable

Operation power supply: +8 — 36 VDC wide range, with anti-reverse connection over-voltage protection circuit.
Power consumption:    less than 2W
Operation temperature:  - 45 — +80ºC
Operation humidity:   10 — 90% (Non-condensation)
Storage temperature:   - 45 — +80ºC
Storage humidity   10 — 95% (Non-condensation)

Isolation voltage: Between input and output 3KVDC, 1minute, leakage current 1mA (output and power in common ground).
Impulse withstand voltage: 3KVAC, 1.2/50us (peak value)

Dimension: 83 mm  x  37 mm  x  51mm
Weight: about 105g

Digital Signal Relay Output D-D Converter Dimension:

 
Note: For details, please contact us for data sheet, thank you!