WTK Lighting Co. Limited
WTK Lighting Co. Limited
GU10 COB LED Spotlight, LM90 9W, 110 to 230V, Dimmable
  • GU10 COB LED Spotlight, LM90 9W, 110 to 230V, Dimmable
GU10 COB LED Spotlight, LM90 9W, 110 to 230V, Dimmable

GU10 COB LED Spotlight, LM90 9W, 110 to 230V, Dimmable

Payment Type:
T/T, Western Union, PayPal
Quantity:

Your message must be between 20 to 2000 characters

Contact Now
Basic Info
Basic Info
Payment Type: T/T, Western Union, PayPal
Product Description
Product Description
  • Power consumption: 9.0W
  • Voltages: 110 to 230V
  • Dimmable: not supported (pay attention to minimum dimmer load)
  • LED brand: Epistar
  • LED type: 3 x 3W COB (chip-on-board)
  • Base: GU10
  • Dimensions: Ø50mm x 75mm
  • Color temperatures: warm white 2,700 to 3,000K
  • Color rendering index (CRI): 75
  • Luminous flux: 420 to 450lm
  • PF: >0.5 power factor
  • Light angle: 35°
  • Lifespan: 30,000 hours
  • Important:
    • Be careful when using LED lamps in the same electricity group as older TL or PL lamps
    • Especially the older types or lamps that are near their end-of-life will emit a voltage peak throughout the electric wiring when they are switched on
    • These peaks will damage your LED lamps and ultimately burn them out
    • We recommend to only use newer TL/PL lamps with electronic ballasts
  • Dimmable:
    • This lamp can be dimmed on a normal dimmer
    • Please pay attention to the minimum load required by the dimmer to function
    • Normal dimmers require a certain amount of electricity to flow through them to properly dim the lamps
    • Because LED lamps use very little electricity, it is possible that your dimmer is unable to dim only 2 or 3 LED lamps
  • Be careful when using LED lamps in the same electricity group as older TL or PL lamps
  • Especially the older types or lamps that are near their end-of-life will emit a voltage peak throughout the electric wiring when they are switched on
  • These peaks will damage your LED lamps and ultimately burn them out
  • We recommend to only use newer TL/PL lamps with electronic ballasts
  • This lamp can be dimmed on a normal dimmer
  • Please pay attention to the minimum load required by the dimmer to function
  • Normal dimmers require a certain amount of electricity to flow through them to properly dim the lamps
  • Because LED lamps use very little electricity, it is possible that your dimmer is unable to dim only 2 or 3 LED lamps
  • Send your message to this supplier

    • Mr.  Yan

    • Enter between 20 to 4,000 characters.

    Related Keywords

    Related Keywords