Jump Starter/Mobile Phone Wireless Charger, Can Start the Car with 12,000mAh

Jump Starter/Mobile Phone Wireless Charger, Can Start the Car with 12,000mAh

Get Latest Price

Payment Type:: T/T or L/C

Quantity:

Your message must be between 20 to 2000 characters

Contact Now

Basic Info

Payment Type:	T/T or L/C

Product Description

Features:

12,000mAh polymer emergency vehicles activated power, 400A large power discharging
One percent of accurate power display
Emergency start when the car have no power or in the low-temperature
Support QI wireless standard charging
USB 5V, 2.4A output to step-down scheme conversion, high-efficiency without heat
LED light: blasting flash, SOS distress signal
Apply the power for the router or modem when power-cut

Five functions:

12V car emergency start
All emergency phone chargers
All emergency charging laptop
High-brightness, multi-mode LED flashlight
Battery capacity up to 12,000mA, small, delicate appearance

Description:

Select the appropriate voltage and connector to the electronic device charging/power supply
To be equipment, press the switch and immediately power, unplug the cable, auto-sleep within a minute
Five lights flashing cycle, five full bright end of charge
With power display function as an external device charging/power supply, the LED display
For the use of LED lighting function, press the key to open 5 seconds start lighting function, then press the key to open switch lighting condition, as follows: lights, strobes, SOS, close
Place the product in a cool dry place, away from direct sunlight

Parameters:

Size: 162.7*76.6*30mm
Weight: 420g
Output: 5/2, 12/2, 19V/3.5A
Input: 12V/1A
Starting current: 200A
Peak current: 400A

Notes:

To 12V car starts, make sure e-power battery indicator in the three above, the red battery clip clamp the positive (+) and black negative battery clamp (-) pole and then the battery cable connector into e-power, automobile ignition switch to start (start) position, car starts, immediately unplug the plug and then remove the battery clip clip

12,000mAh polymer emergency vehicles activated power, 400A large power discharging

One percent of accurate power display

Emergency start when the car have no power or in the low-temperature

Support QI wireless standard charging

USB 5V, 2.4A output to step-down scheme conversion, high-efficiency without heat

LED light: blasting flash, SOS distress signal

Apply the power for the router or modem when power-cut

12V car emergency start

All emergency phone chargers

All emergency charging laptop

High-brightness, multi-mode LED flashlight

Battery capacity up to 12,000mA, small, delicate appearance

Select the appropriate voltage and connector to the electronic device charging/power supply

To be equipment, press the switch and immediately power, unplug the cable, auto-sleep within a minute

Five lights flashing cycle, five full bright end of charge

With power display function as an external device charging/power supply, the LED display

For the use of LED lighting function, press the key to open 5 seconds start lighting function, then press the key to open switch lighting condition, as follows: lights, strobes, SOS, close

Place the product in a cool dry place, away from direct sunlight

Size: 162.7*76.6*30mm

Weight: 420g

Output: 5/2, 12/2, 19V/3.5A

Input: 12V/1A

Starting current: 200A

Peak current: 400A

To 12V car starts, make sure e-power battery indicator in the three above, the red battery clip clamp the positive (+) and black negative battery clamp (-) pole and then the battery cable connector into e-power, automobile ignition switch to start (start) position, car starts, immediately unplug the plug and then remove the battery clip clip

Send your message to this supplier

* From:
* To:

Mr. Li Marketing
* Messages:

Enter between 20 to 4,000 characters.

Related Keywords