Zumex 50hz Commercial Orange Juicer , Electric Citrus Juice

Zumex 50hz Commercial Orange Juicer , Orange Juicer Machine For Bars , Light Weight

Quick Details:

1) Stainless steel 304 material

2) Seamless join whole stainless steel body

3) Film Touchpad swith

4) Internal circuit board

Description:

1)The orange juicer design Reasonably, both exterior and interior structure are advanced. Where are the

original contact with the juice of stainless steel and high-grade plastic wear PC. Food is absolutely safe.

2) The compact machines reasonable, small size, light weight.The machine apply to small drink shops,

fruit shop, restaurants, hotels, bars, the Office of cards, tea - and coffee-houses, a very wide range of

applications. Also applies to the success of the family.

3) With the concept of raising the level of food consumption, as people of freshly squeezed juice will

replace the carbonated beverage drinks. It is a great market potential.

Applications:

Commercial orange juicer can be used in wide range like bar,restaurant,drink shop , home ,supermarket

,gymnasium,entertainment ,hospital etc .

Specifications:

Orange Juicer Detailed Photo:

Orange Juicer Spare Parts:

Two protruding balls ,blade compages ,concave squeezer ,peelers ,peeler seats ,plastic veils ,pressing

screw ,two concave balls .

Orange Juicer Application Photo:

Orange Juicer Operation Instruction:

1. Place the machine on the stable table, connect power plug to a grounded connector plug.

2. Safety check before you turn on the machine:

1) If the nut (4 units) screw down properly.

2) If place the knife rest correctly (press it on the bottom).

3) Place the cover on, screw down two side nut (2 units).

3. It can be used after turn on the power.

4. Put antisepsis and washed fresh oranges (40-80mm) in, the machine will peel the skin, producing fresh

juices,filtrate automatically

Orange Juicer Clean Instruction:

1．Please turn off the power and pull out plug before you clean the machine.Do use neutral washer.

2．Unpack the machine parts,first is stainless steel drawer, cover, knife rest(do not touch blade),peeling

implement(two side),compaction nut(four), ball(2+2.use dry material clean each parts after wash

them by water.

3. Please use dry material to clean the machine

4. Pack all parts after clean.