Customized Printing LED Waterproof Membrane Switch With Tou

Customized Printing LED Waterproof Membrane Switch With Touch Panel

Quick Detail:

toughened glass panel, PC base

110 - 250V AC,50-60hz

Load power: 700w / gang

Work temperature : - 20 ° C - 70 ° C

Mechanical Life:100,000 on - off times

Description:

Panel size : 80 * 80 mm or 86 * 86 mm available

Capability allowance : - 15 % ~ + 10 %

Base : 3different bases, 86 * 86 mm round base , 86 * 86 mmsquare base,or 80 * 80 mm round base

Our Advantages

1. test shows that our switch can work well even under 97% humidity

2. strong anti-interference ability,test shows that our switch still work well under 100% interference conditions

3. Good antistatic performance,test shows that our switch can work well under 30KV high voltage static electricity conditions

4. product itself low power consumption 0.02W

Packaging & Delivery

Customized Printing Waterproof Membrane Touch Switch
1. Membrane Overlay Microwave
2. 3M adhesive
3. 100% QC
4. UV resistance

Overlay Materials: The most commonly used base materials are polyester and polycarbonate.

Rear Adhesive: 3M 467MP, 3M 468MP, etc.

Standard Tolerances: +/-.010 inch.

Matching color: Pantone and RAL color matching system.

Environmental

· Storage Temperature: -40°C (-40°F) to +70°C (158°F).

· Storage Altitude: Sea level to 35,000 feet.

· Operating Temperature and Altitude: -30°C (-30°F) to +75°C (170°F). Can be designed to operate in most environments.

· Humidity: No delamination after 24 hours at 80°C and 90%RH.

Operating Temperature

-30°C to 80°C

Storage Temperature

-40°C to 90°C

Operating Humidity

20%RH ~ 90%RH

Storage Humidity

10%RH ~ 90%RH

Warranty

1years

No noted size common

differenc

±0.20