Sumitomo Type -39 JR-25 Jacket Remover Stripper, optic fiber stripper

Specifications 1.Sumitomo Type-39 JR-25 Jacket Remover Stripper

2.new and original

3.in stock!

Sumitomo Type-39 JR-25 Jacket Remover  optic fiber stripper   New and Original !  IN STOCK!       contact information Nancy Liu Viber / Tel : +86 15118174252 skype:   nancy.hsv             JR-6    

Product name		JR-6
Applicable fiber	Optical fiber material	Silica glass
	Fiber count Coating thickness	Single fiber: Fiber coating ø0.25~ø0.4mm 2 to 12 fiber ribbon: Coating thickness 0.3~0.4mm (Used with fiber holders)
	Cladding diameter	125m
	Coating material	UV cure resin
Coating removal length		max.30mm
Power source		Battery operation (With BU-6): Nominal voltage7.4V, Nominal capacity 1620mAh DC operation (Power supplied from fusion splicer): DC9~15V *1 AC operation (With ADC-1220S): AC100~240V, 50/60Hz
Operating duration, Number of removal cycles per fully charged battery		Approx.10hours (In power save mode and with factory default temperature) Number of removal cycles per fully charged battery: Approx.200 *2
Battery charging time		Approx.2hours (JR-6 cannot be used while the battery is charged.)
Function		Temperature settings: 4 levels Power saving function: Normal Mode/Power Save Mode Battery remaining capacity is indicated in one of four levels when JR-6 is powered on.
Environmental conditions	Operating condition	Operating temperature: 0~+40°C, Humidity: 0~95% (Non-condensing)
	Storage condition	Storage temperature: -40~+60°C, Humidity: 0~95% (Non-condensing), Battery is not applicable.
Size		45(W)×38(H)×138(D)mm
Weight		Approx.235g (Including battery)

          JR-25       Features   Compact and Lightweight for Easy Handling Design Ensures Proper Removal Technique Protecting Fiber Integrity Deep Fiber Alignment Grooves Make Jacket Removal Easy Field Replaceable Blades Built-in Scale For Measurement Reduces Fiber Waste Can Be Used for Fiber Coatings of 250 and 900µm      

Dimensions	25W x 86D x 28H (mm)
Weight	40g
Acceptable Coating Diameter	250 to 900µm
Acceptable Cladding Diameter	125µm

                              Our Main Products   1. FUSION SPLICER: Comway C10; Sumitomo (T-81C); Fujikura (FSM-80S/70S/70R); Fitel S178A; INNO IFS 10 2.OTDR: EXFO (FTB-1/AXS-110/AXS-100/ FTB-200/FTB-500); JDSU (MTS-2000/4000/6000/8000); YOKOGAWA (AQ1200/AQ7275) 3. POWER METER (PPM-350C, FPM-300, HSV-300P); LIGHT SOURCE (FLS-300, HSV-300L); VFL (FLS-241, HSV-321); Multi Loss tester (FOT-930, FOT-302) 4. Anritsu site master S331D, S331L, S331E, S332E. 5. Fiber cleaver (CT-30A/CT-30/CT-05/FC-6S), adapter, battery, electrode, connector, fiber tool kits 6. Fiber cable, patch cord, adapter, closure, pigtail, optical switch, patch panel, etc.. 7.Maintainance and repair, calibration service for the EXFO, JDSU, Sumitomo, Fujikura, Anritsu