
48V eBike Battery Charging Repairer
- Payment Type:
- L/C, T/T, Western Union
- Incoterm:
- FOB
- Min. Order:
- 2000 Bag/Bags
- Min. Order:
- 2000 Bag/Bags
- Delivery Time:
- 35 Days
- Transportation:
- Ocean, Air
- Port:
- SHENZHEN, GUANGZHOU
Your message must be between 20 to 2000 characters
Contact NowPlace of Origin: | SHENZHEN, CHINA |
---|---|
Productivity: | 10000PCS/Month |
Supply Ability: | 120000PCS/Year |
Payment Type: | L/C,T/T,Western Union |
Incoterm: | FOB |
Certificate: | CE, REACH,ROHS,ISO |
HS Code: | 8536300000 |
Transportation: | Ocean,Air |
Port: | SHENZHEN,GUANGZHOU |
A partial or deep discharge will cause sulfation on the plates that reduces eBike Power battery capacity and leads to premature battery failure. Periodically check the battery OCV and charge when necessary. Recharge batteries if needed, Charge whenever the battery OCV is: Wet/flooded: 12.5 or less; AGM: 12.7 or less. It is better to use a EV Battery Charging Restorer or eBike Battery Charging Maintainer to periodically recharge (or "top off") the battery when the SOC drops to 80% or below. Maintaining a high SOC tends to prevent irreversible sulfation. The frequency of recharging depends on the parasitic load, temperature, battery's health, and battery type ,etc.
But the battery used as traction power or energy storage, it unavoidably deep discharged occurs. We should pay more attention to maintain batteries, Such as pulse charging and replenishing water in time, stored in proper temperature and periodically desulphated by our eBike Battery Charging Maintainer.
Our 48V eBike-40S of 48V eBike Battery Charging Repairer is a new generation of high-tech products developed specifically for recovering electric vehicle battery when it is charging every time. It utilizes the energy from the charger to generate electronic pulse waveform with special frequency and strictly controlled rise time, which resonance with the thick sulfate crystals during charging process to continuously dissolved the lead sulfate crystals. Your battery capacity will be gradually recovered everyday and duo to under the disturbance of the specific frequency pulse, the sulfated crystallization re-buildup can be prevented effectively, therefore the battery service life can be prolonged to the maximum.
We're often asked what makes our products better than other trickle or float chargers on the market. It's easy – our patented 36V/48V/60V/72V battery smart pulse technology! No other EV battery normal chargers on the market have this technology in the world. This Power Battery Charging Partner device is a new type of EV Battery Repair tools, it is:
-
A kind of eBike Power Battery Charging Care with pulse desulfation technology, Smart, Simple and Safe
- Ensure the EV driving mileage is longer
- The connection with charger is simple,safe and convenient. Make your common charger become a Smart Charger with Battery Care function
- Suitable for the popular 36V~48V batteries of electric vehicles, buy a set, multi vehicles benefit in family
- A strict circuit filtering technique, does not affect the charging parameters of the charger, safe and carefree
APPLICATION
It is used for 36V/48V 7-40Ah Electric bicycle and motorcycle lead-acid battery bank.
It is not suitable for these battery banks with cell deformed appearance, positive plate softening and corrosion, active material shedding, short circuit, open circuit.
TECHNICAL SPECIFICATION:
1) Environmental Conditions
- Working Environment Temperature: -10℃~50℃
- Storage Environment Temperature: -40℃~70℃
- Relative Humidity of Environment: 45% ~90%RH
2) Electrical Parameters
- Working Current: 36V Battery Mode: ≤65mA 48V Battery Mode: ≤80mA
- Pulse Peak Current: 36V Battery Mode: ≥4,0A 48V Battery Mode: ≥6,0A
- Maximum Voltage: DC80V
- Frequency Range: 7,5kHz~10kHz
- Step 1: Before used, first check the polarity of the charging port on the battery bank, It should be consistent with the input and output polarity of the bottom of the Battery Charging Restorer device to be used, otherwise it will damage the 48V eBike-40S device or your charger.
- Step 2: Insert the charger output header into the 48V eBike-40S device input socket
- Step 3: Let the output of the 48V eBike-40S repair plug into the charging port of the battery bank
- Step 4: The 48V eBike-40S Device will automatically measure the battery voltage, if it is 36V battery Banks, "36V" indicator LED light, if it is a 48V battery bank, 48V indicator LED lights. After it is normal, please insert the input plug of the charger into the electrical outlet. The 48V eBike-40S device will remove sulfated crystals in the charging process.
WARRANTY:
Related Keywords