High Purity Oxygen Plant Medical Oxygen Generator System

Working Principle
Kunpeng Medical Molecular Sieve PSA Oxygen Generator System is a new type of equipment that uses advanced pressure swing adsorption (PSA) technology to extract oxygen from the air. It uses air as the raw material and zeolite molecular sieve as the adsorbent. Under normal temperature and low pressure, the selective adsorption of zeolite molecular sieve to oxygen and nitrogen and the characteristics that the adsorption capacity increases with the increase of adsorption pressure and decreases with the decrease of adsorption pressure are used. 

Adsorb nitrogen under pressure, enrich oxygen, desorb nitrogen under reduced pressure, and regenerate molecular sieve at the same time, cycle alternately, so as to separate oxygen. The specific PSA Medical Oxygen Plant working process is that after the compressed air is purified by the air purification dryer, it enters the adsorption tower through the switching valve. In the adsorption tower, nitrogen is adsorbed by molecular sieves, and oxygen is accumulated at the top of the adsorption tower and then enters the oxygen storage tank. After deodorization, dust removal and sterilization and filtration, qualified medical oxygen is obtained.

How to quickly obtain the most accurate solution of  PSA Oxygen Plant ? Please provide the following data:
1. Oxygen flow rate:
2. The purity of oxygen:
3. Oxygen pressure:
4. Oxygen dew point:
5. Use of oxygen: