7861-93-1812High quality and high stability hydraulic sensor

Product description

When hydraulic fluid is used under pressure, the entire hydraulic system needs to be very strong to withstand unexpected pressure spikes in the system. Pressure spikes occur when the system finds that the pressure exceeds the expected level due to excessive weight, the hydraulic press attempts to mold the thick steel plate, and even when the operator observes an unsatisfactory situation and responds by interrupting to send high pressure to the hydraulic system. A hydraulic fluid system may also be exposed to a large amount of pressure circulation equipment if the operation driven by it is periodic (such as stamping or stamping) or even when sensors monitor pumping operations (such as an automatic idle loop on a farm). When exposed to a large number of cycles, the sensor needs to be able to survive and not change its characteristics. The pressure switch provides an on or off output to the controller when the pressure reaches a predetermined threshold. For example, the pressure may be set to a low setting indicating that the oil level in the system has dropped below an acceptable level and needs to be checked. The other case is that the pressure switch is set to high, indicating excessive system pressure, indicating overload. In both applications, the pressure switch sends a signal to the controller and can respond automatically or turn on a warning indicator to indicate a problem. Specializing in the production of hydraulic pressure sensor, water pressure sensor, oil pressure transmitter, refrigerant pressure sensor, intake manifold absolute pressure sensor, air compressor pressure transmitter, etc.