BMW Multi Tool OBD2 CAS1-3+ KEY PROGRAMMER

BMW MULTI TOOL

Software version: V3.0

V3.0 Update tips:

1.The software v3.0 must be run above firmware V1.0.4.
2.You can go to Help->Device Update->Device Update to update your device to the newest version.
3.Once you update your firmware when use V2.5 software. It does not need update the firmware again.
4.add italian and spanish language.
5.Normal bugfix.

Update tips:

1.The software v2.5 must be run above firmware V1.0.4.
2.You can go to Help->Device Update->Device Update to update your device to the newest version.
3.CAS1/CAS2/CAS3 support perfectly OBDII prepare delaer key.
4.For CAS3+ ISTA P-45, we can OBDII access to CAS now. also inclue prepare delaer key

Description:

1. Car access sytem dentification

2. Read/Write CAS EEPROM(OBDII)

3. Read/Write KM stored in CAS system(OBDII) 4. Read/Write synchronization codes stored in CAS system(OBDII)

5. Synchronize DME and CAS(OBDII) 6. Synchronize CAS and ELV(OBDII) 7. Prepare dealer key for CAS1/CAS2/CAS3/CAS+(support latest CAS3 verison)(OBDII)

8. Read/Restore CAS KEY information(OBDII) 9. Disable/Enable key with working key(OBDII) 10. Clear DTC and Shadow (OBDII)

11. Prepare dealer key with CAS eeprom dump 12. Unlock dealer key prepared with our software with CAS eeprom dump or KEY information 13. Change KM in CAS and instrument dashboard with file dump 14. Have key programmer, you can programm dealer key directly.

Pay attention to the function: Help->Device update. You can get the latest software version and firmware verion when you can access to internet.

1. Menu

Tool: you can choose language here, support “English” and “Chinese Simplified” Restart software to apply your settings.
File Make Key: you can prepare dealer key with EWS and CAS EEPROM dump.
Help: Device update. You can get your device and dongle id version and update it.